• Filter by

Add additional filters

Clear filters and search
11/19/2018

Data Guide

Pre-extension with coarse aggregate at the factory ensures quality and saves contractor labor ... Extra low permeability helps minimize chloride intrusion ... VOC CONTENT 0 g/L less water ...

  • pdf, 94.43 Kb
11/19/2018

Data Guide

Pre-extension with coarse aggregate at the factory ensures quality and saves contractor labor ... Extra low permeability helps minimize chloride intrusion ... VOC CONTENT 0 g/L less water ...

  • pdf, 94.14 Kb
11/19/2018

Data Guide

It can be applied by either the wet or dry shotcrete process ... PACKAGING 55 lb (25 kg) polyethylene-lined bags 3,300 lb (1,500 kg) bulk bags YIELD Approximately 0.46 ft 3 (0.013 m 3 ...

  • pdf, 91.47 Kb
11/19/2018

Data Guide

Versatile, can be applied using dry or wet shotcrete process ... Very low chloride permeability and an integral corrosion inhibitor protects reinforcing steel ...

  • pdf, 90.69 Kb
11/19/2018

Data Guide

It can be applied vertically or overhead by low-pressure spraying or hand troweling ... PACKAGING 55 lb (25 kg) polyethylene-lined bags 3,300 lb (1,500 kg) bulk bags YIELD 0.45 ft 3 ...

  • pdf, 97.16 Kb
11/19/2018

Data Guide

Extra low permeability helps minimize chloride intrusion ... Very rapid-setting so that structures can be opened to vehicular traffic in 1 hour ... Low residual moisture, can be coated in ...

  • pdf, 95.79 Kb
11/19/2018

Data Guide

It is designed for repairing horizontal concrete surfaces ... MasterEmaco T 1061DR is a reduced dust version available separately ... PACKAGING MasterEmaco T 1061 50 lb (22.6 kg ...

  • pdf, 97.10 Kb
11/19/2018

Mid-range water-reducing admixture approvals

S - Can be used if Specified/Submit with Mixture Design/Per Project Basis ... X - Listed as an Approved Material or Product

  • pdf, 55.36 Kb
11/19/2018

DOT Rheology-controling Viscosity-modifying admixtures

- Can be used if Specified/Submit with Mixture Design/Per Project Basis ... X - Listed as an Approved Material or Product

  • pdf, 54.28 Kb
11/19/2018

DOT Manufactured Concrete Products

S - Can be used if Specified/Submit with Mixture Design/Per Project Basis ... X - Listed as an Approved Material or ...

  • pdf, 51.51 Kb
11/19/2018

DOT MasterLife_Kure_Sure

S - Can be used if Specified/Submit with Mixture Design/Per Project Basis ... X - Listed as an Approved Material or Product ...

  • pdf, 57.06 Kb
11/19/2018

DOT Air-entraining admixtures

S - Can be used if Specified/Submit with Mixture Design/Per Project Basis ... X - Listed as an Approved Material or Product

  • pdf, 54.56 Kb
11/19/2018

DOT Retarding and Hydration Control

S - Can be used if Specified/Submit with Mixture Design/Per Project Basis ... X - Listed as an Approved Material or ...

  • pdf, 55.86 Kb
11/19/2018

DOT Accelerating Admixtures

S - Can be used if Specified/Submit with Mixture Design/Per Project Basis ... X - Listed as an Approved Material or Product

  • pdf, 51.69 Kb
11/19/2018

DOT Water-reducing admixtures

S - Can be used if Specified/Submit with Mixture Design/Per Project Basis ... X - Listed as an Approved Material or Product

  • pdf, 53.71 Kb
11/19/2018

DOT High-range water-reducing admixtures

High-Range Water-Reducing Admixtures MasterGlenium Products (unless otherwise noted ... S - Can be used if Specified/Submit with Mixture Design/Per Project Basis ...

  • pdf, 62.19 Kb
11/14/2018

Master X-Seed 55 Dry Cast Pipe Product In Focus

The Challenge Concrete pipe producers are under increased pressure to manufacture a high-quality product and meet demanding schedules, while reducing material costs and inventory ...

  • pdf, 89.29 Kb
11/13/2018

Data Guide

It provides enhanced adhesion and weatherability, making it an ideal solution for many interior and exterior sealing applications ... Used as an acoustical sealant, MasterSeal NP 520 ...

  • pdf, 96.53 Kb
11/5/2018

MasterRoc MP 307 Data Sheet (French)

page 1 of 3 Caractéristiques „ „Très faible viscosité „ „Temps de gélification contrôlé allant de 3 à 22 minutes à 20 °C (68 °F) „ „Température d’application entre 5 °C et 40 °C ...

  • pdf, 88.98 Kb
11/5/2018

MasterFiber MAC 2200 CB Data Sheet

page 1 of 3 Features MasterFiber MAC 2200 CB product is chemically enhanced to provide superior performance as compared to typical high performing synthetic macrofibers ...

  • pdf, 221.73 Kb
1 to 20 of 1944 results